Indicators; Mode Selection Menu; Service Mode - Mita DP-2800 Service Manual

–
ENTER/STATUS

Indicators

Indicator
1–ONLINE/Green
2–DATA/Green
3–ATTENTION/Red

Mode selection menu

The MODE key on the control panel allows to set or change the printer environment such
as the number of copies to make, emulation, etc., and to print a font list, manipulating a
memory card, etc.
During operating in the mode selection, several front panel keys serve exclusively for its
secondary function as labeled beside them (EXIT, +, –, ENTER,
the next page gives a full load map to the full options and the sequence of mode selection
as well as usage of these secondary keys.

Service mode

Within Others option, the Service mode can be accessed by authorized service personnel.
This mode provides the following three treatments for service purpose:
• printing a service information (a service status page)
• cleaning on the drum surface
• accelerating initial toner replenishment for a new developer
The service mode is available only when the printer is ready. To activate these features, see
chapter 3. While in service mode, the printer accepts print data but does not print it.
Cycles reverse through the item selections or enters numeric
values.
Prints a page of status information. During mode selection, this
key finalizes numeric values and other selections for changing
the printer's configuration.
Status
Steady The printer is on-line and ready to prints received
data.
Off The printer is off-line. The printer stores but not prints
received data.
Flashing The printer is receiving data from the host computer.
Steady The printer is processing the data for printing or for
writing on a memory card.
Flashing (1) The printer is warming up. (2) The printer was
stopped because of an error such as the insufficient
memory, memory card errors, etc. (See chapter 6.)
Steady (1) The printer needs attention for a problem that can
be cleared by the user such as an open cover,
missing toner kit, paper-full stack, etc. (2) The printer
was stopped because of a problem that needs
servicing provided by a service technician.
Function
, ). The diagram on
5A2
2-15