Notes On Handling Simm - Mita DP-2800 Service Manual

Notes on handling SIMM

Before proceeding to install SIMM, read the following notes for handling the main circuit
board and SIMMs.
• Protect the electronics by taking these precautions:
• Before touching the main circuit board, touch a water pipe or other large metal object to
discharge yourself of static electricity. While doing the work, it is recommended that you
wear an antistatic wrist strap.
• Touch the main circuit board and SIMM only by the edges, not in the middle. See below.
Yes
• Follow the instructions the SIMM manufacturer should provide.
No
5A2
2-9