Mita DP-2800 Service Manual page 45

5A2
To clean the charger wire, first open the front cover 1. Pull the cleaning knob (green) 2
slowly in and out a few times. This pulls a cleaning pad inside the drum unit along the wire.
2
1
Then, clean the grid using the grid cleaner supplied with the toner kit.
Take the grid cleaner 3 from protective bag in the new toner kit, and remove the cap 4.
4
Pad (impregnated with water)
3
The grid cleaner pad is impregnated with water. Perform the following cleaning procedure
before the pad dries.
3-5