Pausing Copy When Using Finisher - Ricoh pro c900s Operating Instructions Manual

Pausing Copy When Using Finisher

You can pause a large volume of copies when using Finisher.
1. Press the [Suspend/Resume] key.
The key lights up.
2. Remove the stack of paper from the finisher shift tray.
3. Press the [Suspend/Resume] key.
The key turns off, and then copying restarts.
• You can suspend copy only when the output tray is specified as the finisher shift tray.
• Depending on the print image, the prints might not be stacked properly. In such a case, pause printing,
remove the prints, and then resume printing.
BAY033S
BJU101S
Pausing Copy When Using Finisher
1
25