4. Adding Paper, Toner and Staples
1.
While pressing the release lever, align the side fences with the paper size to be loaded.
4
2.
Load paper orderly. Tightly fit the side fences to the loaded paper.
When loading paper larger than A4, draw out the paper extender.
• When paper is loaded which cannot be detected automatically, the user must set the paper size on
the control panel.
• To set the paper in the twin interposer, align the orientation of originals in the ADF as shown below.
• p.73 "Changing to a Size That Is Not Automatically Detected"
62
BJU045S
BJU046S
BJY011S