When The Machine Does Not Operate As Wanted; Indicators - Ricoh pro c900s Operating Instructions Manual

1. When the Machine Does Not Operate
As Wanted
This chapter describes basic troubleshooting procedures.

Indicators

This section describes indicators that appear on the display panel.
Display Panel Indicator
Indicator
: Misfeed indicator
: Load Paper indicator
: Add Toner indicator
: Add Staple indicator
: Add Fusing Oil indicator
: Waste Toner Full indicator
: Empty Hole Punch Receptacle
indicator
: Empty Waste Staple Receptacle
indicator
: Service Call indicator
: Open Cover indicator
Appears when a misfeed occurs.
For details, see p.83 "Removing Jammed Paper".
Appears when paper runs out.
For details, see p.53 "Loading Paper".
Appears when toner runs out.
For details, see p.77 "Adding Toner".
Appears when staples run out.
For details, see p.80 "Adding Staples".
Appears when fusing oil runs out.
For details, see p.114 "Adding the Fusing Oil".
Appears when the waste toner bottle is full.
Contact your service representative.
Appears when the hole punch receptacle is full.
For details, see p.106 "Removing Punch and Staple
Waste".
Appears when the waste staple receptacle is full.
For details, see p.106 "Removing Punch and Staple
Waste".
Appears when the machine is malfunctioning or requires
maintenance.
Appears when one or more covers of the machine is open.
Status
1
7