Denso BHT-700BB-CE Operator's Manual page 57

Bar code handy terminal
Table of Contents

Advertisement

Replacing the Battery Cartridge
3
Insert the tabs on the cover for the
new battery cartridge (1) into the
BHT and load the cartridge in the
direction shown by the arrow (2).
(See "Step 1 Charging" on page 16.)
Point
Insert the new battery cartridge within 3
minutes of removal to avoid data loss.
4
Slide the battery cartridge cover
release
buttons
direction shown by the arrows and
return the hand belt (3) to its original
position.
Battery Cartridge Recycling Request
● This product uses a lithium-ion battery that contains scarce, recyclable resources. We
kindly ask for your cooperation in recycling to ensure reuse of these resources.
● Used battery cartridges must not be disposed of as combustibles.
● Contact your nearest rechargeable battery recycling center or DENSO WAVE sales office
for information on disposal procedures.
● When disposing of used battery cartridges at your nearest recycle center, cover the
terminals with vinyl tape to insulate and protect from overheating or fire due to a
short-circuit.
● Never disassemble battery cartridges.
(1)/(2)
in
the
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-700bwb-ceBht-700wbg-ceBht-710bb-ce

Table of Contents