Denso BHT-700BB-CE Operator's Manual page 33

Bar code handy terminal
Table of Contents

Advertisement

Step 1 Charging
Charging with the battery charger (CH-704)
* The battery cartridge shown in the drawing is the BT-700LL.
Check
the
1
terminals and insert the cartridge.
Connect the power cable to the
2
CH-704 and connect the plug to a
commercial AC power source (100
V AC).
The LED will turn red when charging is
commenced.
The red LED flashes slowly (1
3
second ON, 1 second OFF) when
charging is complete.
Point
• Charging takes approximately 3
hours
(standard
battery
cartridge)
(large-capacity
battery cartridge).
• An only slightly discharged battery
cartridge should take this time to
become fully charged.
battery
cartridge
rechargeable
or
6
hours
rechargeable
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-700bwb-ceBht-700wbg-ceBht-710bb-ce

Table of Contents