Transmitting Data - Denso BHT-700BB-CE Operator's Manual

Transmitting Data

Data gathered by the BHT can be transmitted to the host computer by connector
communication, infrared communication, Bluetooth
communication* or GPRS and EDGE communication**.
Infrared communication is used to transmit data to and from BHT units.
The data transmission method and BHT setting method will differ depending on the
system used, and therefore the system administrator should be contacted for details
of operation.
Refer to the User's Manual for details of each communication method.
Request
Data gathered by the BHT should be promptly uploaded to the host computer.
Dedicated interface cable
(RS-232C or USB)
(1) Connector
CU-733 : RS232C or USB
CU-714 : Ethernet
(2) Infrared
communication
* BHT-700BWB-CE/700BWBG-CE only
To perform wireless communication with a wireless LAN
access point, it is necessary to configure the wireless local
area network (wireless LAN) at the BHT and access point.
** BHT-700BWBG-CE only
It is necessary to establish a contract with a service provider
and acquire a SIM card in order to perform packet data
communication.
***BHT-700BWBG-CE can't be used in North America
Bluetooth
devices
communication
Host computer
Wireless base station
35
®
communication, wireless
®
(3) Bluetooth
communication
®
-enabled
Ethernet
Wireless LAN
access point
(4) Wireless
communication*
(5) GPRS and EDGE
communication**