Short-Slot-Time-Implemented - Avaya W310 Command Reference Manual

To restore the default value for short retry limit:
W310-1 (super/LAP lobby/802.11g first-slot)# no short-
retry-limit
This command will reboot the LAP(s) - do you want to
continue? (Y/N)

short-slot-time-implemented

User level: privileged, supervisor.
Command Mode: Radio card, Template
Use the short-slot-time-implemented command to enable or disable the Short
Slot Time option. The short-slot-time option is used with 802.11g radio cards only and
allows you to maximize throughput. Radio cards in a mixed mode (such as 802.11b/g)
cannot use the short slot time. The default is disabled.
Use the [no] form of this command to reset the short slot time to its default.
Syntax:
The syntax for this command is:
[no] short-slot-time-implemented <active | not-active>
Syntax
<active>
<not-active>
Message:
After this command is initiated, the LAP must reboot for any change to this setting to take
effect. The following message displays after you initiate this command:
This command will reboot the LAP(s). Do you want to continue (Y/N)?
• Type Y to reboot the LAP.
• Type N to cancel the reboot. The change in this setting will not take effect.
Avaya W310 Command Reference Guide
Description
Enables the short slot time option for the 802.11g interface.
Disables the short slot time option for the 802.11g interface.
Chapter 8
131