Automatic Tv Channel Search - Philips DVDR 77/00 User Manual

Installing your DVD recorder
7
Press C .
8
The automatic TV channel search starts. This allows the DVD
recorder to save all available TV channels. This procedure may take
several minutes.
9
When all the TV channels have been found, '
' will appear on the TV screen.
0
To end, press SYSTEM-MENU .
You can read about how to search for a TV channel manually in 'Manual TV channel search'.
After you have performed the automatic channel search you may not agree with the sequence in
which the individual TV channels have been allocated to the programme positions (programme
numbers). You can use this function to rearrange the TV channels already stored or to delete
TV channels you don't want or those with poor reception.
With Easylink, you can search for and store TV channels only on the TV set.
These settings are then transferred to the DVD recorder.
That is why you cannot select this function manually.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder. Press the SYSTEM-MENU button on
the remote control. The menu bar appears.
3
' symbol with D or C .
Select '
4
' using B or A and confirm with C .
Select '
5
Select '
6
Using B or A select the TV channel that you want to delete or
whose order you want to change.
7
Confirm with C .
Unwanted channels or those with poor reception can be deleted using
CLEAR . Proceed at step 6 .
' using B or A and confirm with C .