Step 3:Tv Channel; Automatic Tv Channel Search - Philips DVDR3355 User Manual

Getting Started (continued)
Step 3: TV channel
programming
Before the DVD recorder can start
recording the TV channel programs, you
need to search for the available TV
channels and store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/Cable Box (if any) and switched
them on.
Tuner settings can only be changed
when there is no disc in the disc tray,
QQQ
OOQ
QQQ
_OQ
@
@Q®
0000
SYSTEM
MENU
@
@
This will automatically scan all the
receivable TV channels and the cable
programs from the Cable Box/Satellite
Receiver and store these channels on the
DVD recorder.
Press SYSTEM-MENU
on the remote
control.
'_÷The system menu appears on theTV.
Use • • keys to highlight
{ System Menu - Channel Setup }
and press I_.
@
@
@
illll_
Use • • keys to highlight { Tuner Input
Source } and press OK.
{ Cable }
Select this if the DVD recorder is connected
via a cable box/satellite receiver.
{ Air }
Select this if the DVD recorder is connected
directly to the antenna wall outlet
Press OK to confirm.
Use • • keys to highlight { Channel
Search } and press OK.
"_ The automatic TV channel search
starts. This process may take several
minutes. Once complete, the total
number of channels found appears on the
TV.
TIps: Press _1to go back to previous menu !tern.
Press SYSTEM-MENU to exit the menu.
24