If the display shows an incorrect time or '
'SMART CLOCK' automatically sets the time and date using the information transmitted by the
TV channel. Normally the TV channel stored at programme number 'P01' is used. In the '
' line you can select the programme number (channel name) whose TV channel transmits
this information.
If the time/date is not displayed correctly you need to choose the '
' line and set the date and time manually.
1
Press
SYSTEM-MENU on the remote control. The menu bar
appears.
2
' symbol with D or C .
Select '
3
' using B or A and confirm with C .
Select '
4
' using B or A and confirm with C .
Select '
5
Check if the time in '
with the number buttons 0..9 on your remote control.
6
Check '
', '
the fields, use B or A .
a
b With 'SMART CLOCK', time/date is transferred from the TV channel saved
on 'P01' and automatically corrected.
You can either enter another TV channel for transferring the data or
disable the function.
In the line '
To disable, select '
7
Check the displayed settings and confirm with OK .
'
' will appear briefly on the screen.
8
To end, press SYSTEM-MENU .
', the time and date must be reset manually.
' is correct. If required, change the time
' and '
' in the same way. To move between
' select the relevant TV channel with D or C .
'.
Installing your DVD recorder
' setting in the '