Philips DVDR 77/00 User Manual page 77

Manual recording
1
Switch on the TV set and select the programme number for the DVD
recorder.
2
Insert a disc on which the recording is to be made. This disc is then
checked for content and system.
a
b A DVD+RW disc has been inserted that already contains recordings. Use
the A or B button to select the point where the recording is to start.
a
b The disc inserted is a blank DVD disc.
a
b The disc inserted is a DVD+RW but its contents are not DVD
video-compatible (e.g. a data disc). Recordings on this disc can only be
made if the entire disc is first deleted with the REC/OTR n button.
a
b A disc may contain a maximum of 48 titles (including blank titles). Delete
titles or change the disc.
3
If necessary, use the MONITOR button on the remote control to
switch to the internal tuner in the DVD recorder.
4
CHANNEL q or
Use
number (station name) you want to record. This will appear on the
display:
Scart socket at the back EXT 1 TO TV-I/O
Scart socket at the back EXT 2 AUX-I/O
Front SVHS/audio sockets S-VIDEO / left AUDIO right
Front video/audio sockets A/V S-VIDEO / left AUDIO right
Switching between the S-VIDEO and VIDEO sockets takes place
automatically. If a signal is available at both sockets at the same time,
the signal at the S-VIDEO socket has priority.
Digital Video (i Link) front socket DV IN
5
To start recording, press REC/OTR n on the remote control or
RECORD on the DVD recorder.
If you want to start the recording at the end of the existing
recordings, hold down the REC/OTR n button until the message
' ' appears on the display.
For DVD+R discs each new recording is always added at the end of
all previous recordings as existing recordings cannot be overwritten.
This will, for example, appear in the display:
' will appear on the display.
CHANNEL r to select the programme