Philips DVDR 77/00 User Manual page 36

3
SYSTEM-MENU on the remote control. The menu bar
Press
appears.
4
' symbol with D or C .
Select '
5
' using B or A and confirm with C .
Select '
6
Select '
7
', select the desired display using C .
In '
(Frequency),
8
In ' ', enter the frequency or channel of the TV station
using the number buttons 0..9 .
a
b In this case, press C to start the automatic search. A changing channel
number/frequency number will appear on the TV screen.
Continue the automatic search until you have found the TV channel you
are looking for.
9
Using D or C in '
number you want to use for the TV channel, e.g. '
1
In '
2
Select the desired character position using D or C .
3 Change the character at the desired position with B or A .
4
Select the next character position in the same way.
5
Confirm with OK .
', use D or C to select the TV system that produces the
In '
least distortion of picture and sound.
NICAM is a digital sound transmission system. Using NICAM, you can
transmit either 1 stereo channel or 2 separate mono channels. However, if
reception is poor and the sound distorted you can turn off NICAM.
In ' ', select '
To change the automatic process for storing channels (fine tuning), select
' '.
Using D or C you can try to fine-tune the TV channelmanually.
0
Press OK to store the TV channel.
A
To search for other TV channels, begin again at
B
To end, press SYSTEM-MENU .
' using B or A and confirm with C .
(Channel), (Special/hyperband channel)
', select the programme
', press C .
' using D or C .
8
Installing your DVD recorder
'.
.