The 'Digital Photo Manager'
You can adjust various roll settings to your individual needs. You can change the name and date
of a roll.
You can re-enter or change the name of an existing roll.
The name on the storage media will not be changed. The new name will be stored additionally.
1
Select '
' in the menu '
confirm with C .
2
Type the new roll name using the 0..9 buttons like you would do on
a cellular phone. You can also move to the position where you want
to enter or change a character using D , C .
3
Enter the new name with the buttons B , A .
Press a number button as often as the required character or the number
appears. You can enter language dependent characters with the buttons
N or O on the corresponding character e.g.: 'ä', button 2 for 'a' and
then with O as often as 'ä' appears.
For special characters press the button 1 repeatedly.
The position for the following character will be selected automatically.
To enter a space press the button 1 .
To switch over to upper case characters press SELECT .
To erase a character press CLEAR .
4
To end, press OK .
1
Select '
' in the menu '
with C .
2
Select the field you want to change using D , C .
3
Change the date using B , A or use the 0..9 buttons to enter the
numbers.
4
Confirm the changes with OK .
1
Select '
' in the '
with OK .
2
This will take you directly into the roll overview where you can make
changes.
' using B , A and
0..9
' using B , A and confirm
' using B , A , and confirm