Philips DVDR 77/00 User Manual page 97

Programming a recording (TIMER)
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER s on the remote control.
The programming method selected last is marked.
3
Select line '
the C button.
The information will appear on the screen.
4
Select the input field with D or C .
5
Enter information with B or A or with the number buttons 0..9 .
' use SELECT to select from the following options:
In '
: Repeated daily recordings from Monday to Friday
: Repeated weekly recordings (every week on the same day, e.g.
Monday).
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('
' input field using TIMER s . Using SELECT switch on
Select the '
'VPS/PDC' (' ' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (' ' goes out).
' input field using C .
Select the '
Use SELECT to select the recording mode.
6
If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER s .
The disc you have inserted will be checked.
8
Search the position on the disc where the recording should begin.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, '
' with B or A . and confirm with
') or EXT 2 AUX-I/O (' ').
using the STANDBY m button.
' will light up on the recorder display.