Philips DVDR 77/00 User Manual page 74

It is also possible to erase an album. The pictures within an album will not be deleted and shall
remain on the storage medium (disc or memory card) unchanged.
1
Select '
using B , A and confirm with OK .
2
If you really want to erase the album, press OK to confirm, otherwise
cancel the function using A .
3
The overview of all albums will then be displayed.
You can adjust various settings for a DVD+RW/+R or a memory card. If a CD-R/RW is loaded
no changes can be made, because this media cannot be recorded by the DVD recorder
1
Press PHOTO on the remote control. The '
appear.
2
Use B or A to select the medium you want to process (disc or
memory card). If you did not insert the corresponding medium (disc
or memory card), a warning sign will appear above the symbol on the
left hand side of the screen.
3
Press C .
4
Select the line '
The name of the media will be created by the digital camera.
The write protection of the media can be switched on or off.
You can use this function only if the write protection can be switched off by a software. You can
not select this line if your memory card was equipped with a mechanically switch.
The DVD+RW/+R will be prepared for the data transfer. Read further information in the section
'Preparing a DVD+RW/+R'.
You can select this line only if a 'not finalised' DVD+R is loaded.
If you store pictures on a DVD+R, you have to finalise the disc to play it on a DVD-player.
Once this process is complete, no further changes can be made.
With these setting all data (rolls and albums) can be erased on a recordable media (DVD+RW
or memory card). This procedure cannot be reversed
' (second page) in the '
' and confirm with OK .
The 'Digital Photo Manager'
'
' screen will