Start A Session With Training Target - Polar Electro M460 User Manual

Hide thumbs Also See for M460:

Getting started manual (2 pages)

User manual (74 pages)

Table Of Contents

Table of Contents

If you have set the GPS function on in this sport profile and/or a compatible

will automatically start searching for the signals.

Stay in the pre-training mode until M460 has found the GPS and sensor signals and your heart rate to

make sure your training data is accurate. To catch the GPS satellite signals, go outdoors and away from tall build-

ings and trees. Keep your M460 still with the display facing upwards during the search. Hold the position until M460

has found the satellite signals.

Finding GPS satelllite signals is faster with the help of assisted GPS (A-GPS). The A-GPS data file is automatically

updated to your M460 when you sync your M460 with the Flow web service via the FlowSync software. If the A-GPS

data file has expired or you haven't synced your M460 yet, more time may be needed for finding the satellite signals.

For more information, see

3. When M460 has found all the signals, press START.

ing.

Heart rate: M460 has found your heart rate sensor signal, when your heart rate is shown.

GPS: The percentage value shown next to the GPS icon indicates when the GPS is ready. When it reaches 100 %,

OK is displayed.

Cycling sensors:

sensors to more than one bike, you'll see a number next to the bike icon indicating the bike in use. M460 chooses the

bike to which the nearest sensor is linked.

Example:

You've linked a speed sensor to

the pre-training mode in M460. The speed sensor linked to

Bike 1

for the ride. Number 1 is shown next to the bike icon.

If you wanted to use

Return to the time mode. Then, increase the distance between M460 and

nearest to M460. Enter the pre-training mode again.

Touch the sensor in