Set Up In The Polar Flow Web Service; Charge The Battery - Polar Electro M460 User Manual

SET UP IN THE POLAR FLOW WEB SERVICE

1. Go to flow.polar.com/start
Flow web service.
2. Open the installation package and follow the on-screen instructions for installing the software.
3. Once the installation is complete, FlowSync opens automatically and asks you to plug in your Polar device.
4. Plug M460 into your computer's USB port with the USB cable. M460 wakes up and starts charging. Let your com-
puter install any USB drivers if it suggests so.
5. The Flow web service opens automatically on your internet browser. Create a Polar account or sign in if you already
have one. Fill in your physical settings precisely as they have an effect on calorie calculation and other Smart Coach-
ing features.
6. Start synchronization by clicking Done, and the settings will be synchronized between M460 and the service.
FlowSync status will change to completed, once the synchronization is done.
7. You are requested to update your M460 software. Click Yes to update the latest software version to your M460. It
may take 20-30 minutes to complete. Please update your M460 to get it fully operational with complete set of fea-
tures.

CHARGE THE BATTERY

The M460 has an internal, rechargeable battery. Use the USB cable included in the product set to charge it via the USB port
on your computer. You can also charge the battery via a wall outlet. When charging via a wall outlet use a USB power
adapter (not included in the product set). If you use an AC adapter, make sure that the adapter is marked with "output 5Vdc"
and that it provides a minimum of 500mA. Only use an adequately safety approved AC adapter (marked with "LPS", "Limited
Power Supply" or "UL listed").
1. Lift the rubber cover off the USB port. Plug the micro USB connector into the USB port in the M460, and plug the
other end of the cable into your PC.
and download the Polar FlowSync software, which you need to connect your M460 to the
10