Delete A Pairing; Polar Adjustable Bike Mount - Polar Electro M460 User Manual

1. In M460, go to Settings > General settings > Pair and sync > Pair and sync mobile device
2. Once your device is found, the device ID
3. Press START, Connecting to device
4. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your M460.
5. Pairing completed
or
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device
3. In M460 time mode, press and hold BACK.
4. Connecting to device
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your M460.
6. Pairing completed

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:
1. Go to Settings > General settings > Pair and sync > Paired devices
2. Choose the device you want to remove from the list and press START.
3. Delete pairing?
4. Pairing deleted

POLAR ADJUSTABLE BIKE MOUNT

You can install the Polar Adjustable Bike Mount either on the stem of your bike, or on the left or right hand side of the handle
bar.
1. Place the rubber base on the stem/handlebar.
2. Position the bike mount on the rubber base so that the POLAR logo is in line with the handlebar.
3. Secure the bike mount onto the stem/handlebar with the O-ring.
4. Align the ledges on the back of the M460 with the slots on the bike mount and turn clockwise until the M460 is in place.
is displayed, followed by
is displayed when you are done.
is displayed, followed by
is displayed when you are done.
is displayed, choose Yes
is displayed when you are done.
Polar mobile xxxxxxxx
Connecting to
Connecting to
and press START.
20
is displayed on M460.
app.
(Searching for Polar
app.
and press START.
and press START.
M460) is displayed.