Asr 5000 System Administration Guide, Staros Release 21.1 - Cisco ASR 5000 Administration Manual

Getting Started
Ques.
24
25
—
—
—
Do you want to view the configuration script created[yes/no]: y
config
system hostname
context local
port ethernet 24/1
Task
Enable remote access via telnet.
Enable FTP access to the system.
Review and/or modify the configuration of
previous prompts.
Review the configure script created by the
wizard based on your inputs.
Apply the configuration file to the system.
hostname
admin_name
administrator
interface spio1
ip_address subnet
ip address
#exit
ip route 0.0.0.0 0.0.0.0
v1_key
ssh key
v2_rsa_key
ssh key
v2_dsa_key
ssh key
server sshd
subsystem sftp
#exit
no server telnetd
no server ftpd
#exit
bind interface spio1 local
no shutdown
Description/Notes
Note: For maximum system security, do not enable
telnet protocol.
Note: in release 20.0 and higher Trusted StarOS
builds, telnet is not supported.
File Transfer Protocol (FTP) uses TCP port number
21 by default, if enabled.
Note: For maximum system security, do not enable
FTP.
Note: in release 20.0 and higher Trusted StarOS
builds, FTP is not supported.
1 Enter the number of the prompt to be modified.
2 Configure the parameter.
3 Optional. Repeat step 1 and step 2 to modify
additional settings.
4 Enter "done" when you have completed all
changes.
An example of a created script is displayed in the
example below. Variables are displayed in italics
(variable).
Once applied, the parameter configuration is
automatically saved to the system.cfg file stored on
the primary SMC compact flash card.
passwd
password
gw_address
spio1

ASR 5000 System Administration Guide, StarOS Release 21.1

The Quick Setup Wizard
21