Packet Processing Card Run/Fail Led States - Cisco ASR 5000 Administration Manual

Staros release 21.1

Hide thumbs Also See for ASR 5000:

Table of Contents

Troubleshooting

Checking the LEDs on the Packet Processing Cards

Figure 14: Packet Processing Card LEDs

The possible states for all packet processing card LEDs are described below.

Packet Processing Card Run/Fail LED States

The packet processing card Run/Fail LED indicates the overall status of the card. This LED should be green

for normal operation.

The possible states for this LED are described in the following table. If the LED is not green, use the

troubleshooting information in the table to diagnose the problem.

ASR 5000 System Administration Guide, StarOS Release 21.1