License Expiration Behavior; Requesting License Keys - Cisco ASR 5000 Administration Manual

Staros release 21.1
Hide thumbs Also See for ASR 5000:
Table of Contents

Advertisement

License Expiration Behavior

Important
Step 1
Open the configuration file to which the new license key commands are to be copied.
Step 2
Copy the license as shown in the example, including the "\ (double-quote slash). Please note: this is not a functional
license.
"\
VER=1|C1M=000-0000-00|C1S=03290231803|C2M=11-1111-11-1|C2S=\STCB21M82003R80411A4|
DOI=0000000000|DOE=00000000|ISS=1|NUM=13459|0000000000000|LSP=000000|LSH=000000|
LSG=500000|LSL=500000\|FIS=Y|FR4=Y|FPP=Y|FCS=Y|FTC=Y|FMG=Y|FCR=Y|FSR=Y|FPM=Y|FID=Y|
SIG=MCwCF\Esnq6Bs/XdmyfLe7rHcD4sVP2bzAhQ3IeHDoyyd6388jHsHD99sg36SG267gshssja77
end
Step 3
Paste the license key into the configuration
Paste the license key information at the beginning of the configuration file to ensure the system has the expected capacity
and features before it configures contexts.
Step 4
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
License Expiration Behavior
When a license expires, there is a built-in grace period of 30 days that allows normal use of the licensed session
use and feature use licenses. This allows you to obtain a new license without any interruption of service.
The following Exec mode command lists the license information including the date the grace period is set to
expire:
[local]

Requesting License Keys

License keys for the system can be obtained through your Cisco account representative. Specific information
is required before a license key may be generated:
• Sales Order or Purchase Order information
• Desired session capacity
• Desired functionality
• CompactFlash detail
To obtain the model and serial number of a CompactFlash card, enter the following command at the Exec
mode prompt:
[local]
Where slot# is either 8 or 9, depending on the chassis card slot where the SPC/SMC is installed.
ASR 5000 System Administration Guide, StarOS Release 21.1
146
License key information is maintained as part of the CLI configuration. Each time a key is installed or
updated, you must re-save the configuration file.
host_name
show license information
#
host_name
show card hardware slot_number
#
Software Management Operations

Advertisement

Table of Contents
loading

Table of Contents