Saving Your Configuration; Viewing Collected Bulk Statistics Data - Cisco ASR 5000 Administration Manual

Saving Your Configuration

The following is an example command output:
Bulk Statistics Server Configuration:
Bulk Statistics Server Statistics:
File 1
Bulkstats Receivers:
File 2 not configured
File 3 not configured
File 4 not configured
Saving Your Configuration
Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Viewing Collected Bulk Statistics Data

The system provides a mechanism for viewing data that has been collected but has not been transferred. This
data is referred to as "pending data".
View pending bulk statistics data per schema by entering the following Exec mode command:
show bulkstats data
The above command also shows the statistics of remote files, if configured as described in
Optional Settings, on page
ASR 5000 System Administration Guide, StarOS Release 21.1
160
Server State:
File Limit:
Sample Interval:
Transfer Interval:
Collection Mode:
Receiver Mode:
Local File Storage:
Records awaiting transmission:
Bytes awaiting transmission:
Total records collected:
Total bytes collected:
Total records transmitted:
Total bytes transmitted:
Total records discarded:
Total bytes discarded:
Last collection time required:
Last transfer time required:
Last successful transfer:
Last successful tx recs:
Last successful tx bytes:
Last attempted transfer:
Remote File Format:
File Header:
File Footer:
Primary: 192.168.0.100 using FTP with username administrator
Records awaiting transmission:
Bytes awaiting transmission:
Total records collected:
Total bytes collected:
Total records transmitted:
Total bytes transmitted:
Total records discarded:
Total bytes discarded:
Last transfer time required:
No successful data transfers
No attempted data transfe
158.
Enabled
6000 KB
15 minutes (0D 0H 15M)
480 minutes (0D 0H 15M)
Cumulative
Secondary-on-failure
None
114
8092
59926
4190178
59812
4188512
0
0
2 second(s)
0 second(s)
Wednesday December 7 12:14:30 EDT 2011
190
13507
Wednesday December 7 12:14:30 EDT 2011
/users/ems/server/data/chicago/bulkstat%date%%time%.txt
"CHI_test %time%"
""
0
0
0
0
0
0
0
0
0 second(s)
Bulk Statistics
Configuring