Wing Mounting Flange - Partial Renewal; Tools; Procedure - Audi A8 Service Manual

RO: 50 72 55 02
2 Wing mounting flange - Partial re‐
newal
WARNING
Always observe safety precautions.
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes .
2.1

Tools

Special tools and workshop equipment required
♦ Compact angle grinder -VAS 5167-
♦ Pneumatic glue gun -V.A.G 2005 B-
♦ Shielded arc welding equipment 250A
2.2

Procedure

Cutting locations
WARNING
Take care not to damage node castings and extruded sections
when cutting.
– Remove small punch rivets. Use rechargeable riveter -VAS
5279A- with attachments S1 and D2 from -VAS 5279/2 - or
rechargeable riveter -VAS 5279B- with attachments S1 and
D2 .
– Make separating cut as shown using pneumatic sabre saw -
V.A.G 1523A- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
Body Repairs - Edition 05.2011

2. Wing mounting flange - Partial renewal

39