Procedure - Audi A8 Service Manual

Audi A8 2003 ➤
Body Repairs - Edition 05.2011
♦ Accessory set for rechargeable riveter -VAS 5279/1-
♦ Rechargeable riveter -VAS 5279A-
♦ Alternatively, you can use the new rechargeable riveter -VAS
5279 B- . This is a complete set.
♦ Shielded arc welding equipment
♦ Pneumatic sabre saw -V.A.G 1523A-
6.2

Procedure

Cutting locations
– Mark off separating cuts according to degree of damage and
make cuts using pneumatic sabre saw -V.A.G 1523A- .
– Separate original joint with rechargeable riveter -VAS 5279A- .
– Separate bonded joints using chisel -VAS 5300/34- .
– Make separating cut 3 in front of node casting.
84
Rep. gr.51 - Body - centre
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.