Audi A8 2003 ➤
Body Repairs - Edition 05.2011
4 - Mounting for front longitudi‐
nal member
6 - Mounting for suspension
strut and alignment bracket
mounting -8-
12 - Mounting for bar
16 - Mounting for front longitu‐
dinal member
20 - Bracket
21 - Front production mounting
May have been forced up‐
wards by handling vehicle in
factory: when checking dimen‐
sions, pack with spacer up to 4
mm if necessary
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
27
6. Straightening jig