Audi A8 Service Manual page 54

Audi A8 2003 ➤
Body Repairs - Edition 05.2011
Replacement parts
♦ Front longitudinal member
♦ Connecting collar with bolts
Preparing new parts
Note
Align longitudinal member with bolted-on parts.
Note
Threads must be free of paint and grease.
– Match length if necessary. Distance from node casting at least
1 mm.
– Insert threaded collar in longitudinal member.
– Insert longitudinal member with threaded collar in node cast‐
ing.
– Hand-tighten bolts.
– Tighten bolts 1 - 6. (Tightening torque 24 Nm).
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
50
Rep. gr.50 - Body - front