Connecting For Screen Mirroring With A Windows 8.X/Windows 10 Computer - Epson BrightLink 697Ui User Manual

9. Select Display and select these settings as necessary
• Display PIN Code selects whether the PIN code is displayed on the projected image while
projecting from sources other than the Screen Mirroring source or not.
• Display Device Name selects whether the connected device name is displayed on the projected
image while projecting from sources other than the Screen Mirroring source or not.
10. When you finish selecting settings, select Set and press Enter.
Parent topic:
Mirroring)

Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer

You can set up your computer to wirelessly project images and play sound using Screen Mirroring.
1. Select the Screen Mirroring settings on your projector as necessary.
2. Press the LAN button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
3. Do one of the following:
• Windows 10: Open Action Center and select Connect.
• Windows 8.x: Select Devices > Project > Add a wireless display.
4. Select your projector's Display Name from the list.
5. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen
Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your computer or mobile device.
Note: It may take some time to establish the connection. Do not disconnect the projector's power
cord while it is connecting to your device. This may cause your device to freeze or malfunction.
Parent topic:
Mirroring)
Related references
Projector Network Settings - Network Menu
Related tasks
Selecting Screen Mirroring Settings
Wireless Network Projection from a Mobile Device or Windows Computer (Screen
Wireless Network Projection from a Mobile Device or Windows Computer (Screen
87