Epson BrightLink 697Ui User Manual page 194

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

Note: For the most accurate calibration, make sure you touch the center of the circle.

Note: Make sure you are not blocking the signal between the pen and the interactive receiver (next

to the projection window on the projector).

7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next

circle appears at the top of a new column.

Note: If you make a mistake, press the Esc button on the remote control to go back to the previous

circle. To restart the calibration process, press and hold the Esc button for 2 seconds.

8. Continue until all of the circles disappear.

Parent topic:

Pen Calibration