Epson BrightLink 697Ui User Manual page 46

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

3. Connect a USB cable to the USB-B port on the projector and to the USB-A port on the control pad.

4. Connect another USB cable to the USB port on the bottom of the control pad and any available USB

port on your computer.

5. To use USB Display, do one of the following:

• Windows 10/Windows 8.x: Click EPSON_PJ_UD in the upper right-corner, then select Run

EMP_UDSe.exe in the dialog box that appears to install the Epson USB Display software.