Epson BrightLink 697Ui User Manual page 86

1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select On as the Screen Mirroring setting.
4. Select Screen Mirroring Settings and press Enter.
5. To enter a name for the projector, select Display Name. You can enter up to 32 alphanumeric
characters.
6. Select Basic or Extended as the Operation Mode setting.
7. Select Basic and select these settings as necessary:
• Wireless LAN Sys. lets you select the type of wireless LAN system the projector is connected to.
• Adjust Image Quality lets you adjust the screen mirroring speed/quality. Select a small number
to improve the quality and select a large number to increase the speed.
• Connection Mode lets you select the type of WPS (Wi-Fi Protected Setup) you are using.
8. Select Extended and select these settings as necessary (The Extended setting is only available if
you select Extended as the Operation Mode setting.):
• Meeting Mode lets you select whether to allow other devices to connect while using Screen
Mirroring. Select No Interruptions to prevent other devices from connecting while Screen
Mirroring is active, or select Interruptions OK to allow another device to connect.
• Channel lets you select the wireless channel for the Screen Mirroring connection.
86