Epson BrightLink 697Ui User Manual page 297

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

Event ID code

Cause and solution

A screen mirroring communication error has occurred. Turn the projector off and on

again, or restart the network software.

Failed to start Screen Mirroring. Turn the projector off and on again.

Unstable screen mirroring communication. Check the network communication

status, wait a few moments, and try connecting to the network again.

Connection failed. If you see the PIN entry screen on your computer, enter the PIN

code displayed on the Screen Mirroring standby screen or at the bottom right of the

projected image. If this does not solve the problem, restart the projector and the

connected devices, and then check the connection settings.

The network software did not start. Turn the projector off and then on again.

Unstable network communication. Check the network communication status, wait a

few moments, and try connecting to the network again.

Cannot display the transferred images. Restart the network software.

Communication with computer was disconnected. Restart the network software.