Epson BrightLink 697Ui User Manual page 199

Wireless full hd 3lcd ultra short-throw interactive display

Hide thumbs Also See for BrightLink 697Ui:

Table of Contents

A flashing green circle appears in the upper left corner of your projected image.

7. Touch and hold the center of the circle with your finger until the circle disappears and another circle

appears, then release it.

The circle disappears, and you see another circle below the first one.

Note: For the most accurate calibration, make sure you touch the center of the circle with the tip of

your finger.

Note: Make sure you are not blocking the signal between your finger and the interactive receiver

(next to the projection window on the projector).

8. Touch the center of the next circle with your finger and continue until all of the circles disappear.