Epson BrightLink 697Ui User Manual page 77

Note: If the control pad is connected to the projector, you can connect the USB key to the USB-A
port on the control pad instead.
You see a projected message that the network information update is complete.
4. Remove the USB key.
5. Insert the USB key into a USB port on your computer.
Note: In Windows Vista, if you see the AutoPlay window, select Run MPPLaunch.exe, then select
Allow on the next screen.
6. Follow the on-screen instructions to install the EasyMP Multi PC Projection software.
Note: If you see a Windows Firewall message, click Yes to disable the firewall. You need
administrator authority to install the software. If it is not installed automatically, double-click
MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN or Source Search button on your remote control or restart your computer.
7. Run your presentation as necessary.
77