Table of Contents
Advertisement
2 SYSTEM CONFIGURATION
2 SYSTEM CONFIGURATION
This chapter explains the system configuration of the Q64TC.
2.1 Applicable Systems
(1) Applicable modules and numbers of Q64TC modules that may be
CPU module
Network module
(2) Base unit which the conversion can be installed
(3) Compatibility with a multiple PLC system
2 - 1
mounted
The following table indicates the CPU modules and network modules (for remote
I/O stations) which accept the Q64TC, and the number of Q64TC modules that
can be mounted.
Applicable module
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
QJ72LP25-25
QJ72BR15
QJ72LP25G
QJ71LP25GE
1 See User's Manual (Function Explanation, Program Fundamentals) for the CPU module to use.
2 See Q Corresponding MELSECNET/H Network System Reference Manual (Remote I/O
network).
The Q64TC can be mounted in any I/O slot( 3 ) of a base unit.
However, combining it with other mounted modules may result in a power supply
shortage depending on the number of modules to be mounted. Thus, always
take into consideration the power supply capacity when mounting modules.
3 Within the I/O point ranges of the CPU modules and network modules (for
remote I/O stations)
First read the QCPU (Q mode) User's Manual (Function Explanation, Program
Fundamentals) if the Q64TC is used with a multiple PLC system.
(a) Compatible Q64TC
Use a Q64TC with function version B or higher if using the module in a
multiple PLC system.
(b) Intelligent function module parameters
Perform PLC write of the intelligent function module parameters to the
control PLC of the Q64TC only.
Number of modules that
can be installed
Maximum 16
Maximum 24
Can be installed in Q mode only
Maximum 64
1
(
)
Maximum 64
MELSECNET/H Remote I/O
Maximum 64
station (
MELSEC-Q
2
Remarks
1
(
)
1
(
)
2
)
2 - 1
Advertisement
Table of Contents
