Cold Junction Temperature Process Value (Buffer Memory Address: 1D H ); Man Mode Shift Completion Flag (Buffer Memory Address: 1E H ) - Mitsubishi Electric MELSECSystem Q User Manual

3 SPECIFICATIONS
3.5.9 Cold junction temperature process value (buffer memory address: 1D
3.5.10 MAN mode shift completion flag (buffer memory address: 1E
3 - 33
(1) Stores the measured temperature (0 to 55°C) of the cold junction compensation
resistor fitted to the Q64TCTT(BW).
(1) This flag checks whether switching from the automatic mode (AUTO) to the
manual mode (MAN) has been completed or not.
The bit associated with the corresponding channel turns to "1" on completion of
switching to the manual mode.
• Channel 1: Bit 0 (b0)
• Channel 2: Bit 1 (b1)
• Channel 3: Bit 2 (b2)
• Channel 4: Bit 3 (b3)
(2) When setting the manipulated value (MV) in the manual mode, make setting after
confirming that the manual mode shift completion flag has turned to "1".
MELSEC-Q
)
H
)
H
3 - 33