18
SERVICE WORK ON THE ENGINE
18.4
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
Main work
–
Remove the oil filler plug
–
Fill engine oil to the middle
Engine oil (SAE 10W/50) (
Alternative 1
Engine oil (SAE 10W/60) (00062010035) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
K00579-10
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
p. 102)
with the O-ring from the clutch cover.
of the level viewer.
p. 117)
Always make sure there is sufficient ventilation when running the
engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
p. 102)
p. 117)
105