12
SERVICE WORK ON THE CHASSIS
12.1
Raising the motorcycle with the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.3
Bleeding the fork legs
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
Info
While riding, the side stand must be folded up and secured with the rubber
band.
401943-10
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
402556-10
Finishing work
–
Remove the motorcycle from the lift stand. (
to the ground with your foot and lean
p. 50)
.
p. 50)
50