Operator Guide - Saeco Aulika Sup 040R Service Manual

AULIKA
3.2.

Operator guide

To enter the menu, turn the machine back on and press the following keys in sequence
- Cappuccino
- Stand-By
- Milk coffee
- Clean
Menus must be PASSWORD-protected.
The PASSWORD is not requested if it is set to the default value (0000). The password must be changed upon first
starting the machine, so as to prevent access by unauthorised staff.
PASSWORD SETTING
The PASSWORD shall be set by the operator, so as to prevent access by unauthorised staff, who might change the
settings of the machine and cause its malfunction.
Follow these steps to set the PASSWORD:
1
Access the programming menu
of the machine
3
Press the "
5
To selet "SET PASSWORD" press the
Clean key.
Press the "
7
Press the " Clean " key or the "
desired number.
9
Repeat procedures (7) and (8) to
set all the chosen numbers.
CREDIT MENU This menu makes it possible to manage credit so as to avoid the delivery of the wrong product Credit
management does not work for hot water, hot milk and steam delivery.
To manage the performance of the machine with credit
CREDIT MENU
ADD CREDIT
CLEAR CREDIT
DISPLAY CREDIT
OFF
ON
CHECK CREDITS
OFF
ON
" key to enter.
" key to enter.
" key to enter the
This function makes it possible to add credit.
This function makes it possible to clear all input credit.
This function makes it possible to display the available credit in the main page.
Note: the "CHECK CREDIT" function must be enabled, otherwise the machine cannot
display the credit, independently from the choice of parameter.
To disable credit display.
Note: the machine shall always display the number of credits when they reach the
minimum threshold of30 credits, to allow the user to warn the operator.
To enable credits display
This function makes it possible to enable the credits check
To disable operation with credits check
To enable operation with credits check
If the sequence is correct,
the programming menu is
accessed.
2
4
6
Now it is possible to set the desired PASSWORD
8
Press the " " key to confirm the shown number
and proceed to the next setting.
Rev. 00 / July 2012
03 USER GUIDE
To select "MACHINE MENU" press the
Clean key
Press the " " key to enter the
"GENERAL MENU"
Page / 07
02