Saeco Aulika Sup 040R Service Manual page 18

AULIKA
MACHINE MENU Makes it possible to customise the machine functions settings
To change the operating settings of the machine
GENERAL MENU
SOUND
OFF
ON
ECOMODE
OFF
ON
STAND-BY SETTING
15 MINUTES
30 MINUTES
60 MINUTES
180 MINUTES
SELF-LEARNING
OFF
ON
SET PASSWORD
DISPLAY MENU
This function makes it possible to set the language for the menu and the brightness of the display
DISPLAY MENU
LANGUAGE
ITALIAN
BRIGHTNESS
CONTRAST
This function makes it possible to enable/disable the audible warnings
To disable the audible warnings
To enable the audible warnings
This function manages the activation of the machine boilers, to save energy. This function's default
setting is "ON".
In this way, when the machine is turned on all the boilers are also turned on, to allow immediate
preparation of all beverages. This entails a higher energy consumption, as the machine is always
ready to use.
In this way, when the machine is turned on only the coffee boiler is turned on. The machine uses
less energy, but requires more time to deliver products containing milk.
This function makes it possible to set the interval after which the machine shall go to stand-by after
the latest beverage dispensed. The default interval is 30 minutes.
After the expiration of the set interval, the machine goes on stand-by. Press any key to wake the
machine.
After a diagnostic cycle and a heating cycle the machine is again ready for use.
To enable the self-learning function with reference to the length of the dispensed beverages
In this way the self-learning function is disabled
In this way the self-learning function is enabled; keep a key pressed for 3 seconds to start the
automatic self-learning cycle for the length of the beverage in the cup
To set the access PASSWORD for machine programming.
Note: if the PASSWORD is (0000), it shall not be requested during the access procedure.
If you forget the PASSWORD, you need to start a recovery procedure through the
customer service.
This setting is fundamental for the correct adjustment of the machine parameters according to the
Country of the user.
The currently selected language is displayed. It is possible to change language using the
appropriate keys.
To set the correct brightness of the display according to the environmental lighting.
To set the correct contrast of the display according to the environmental lighting.
Rev. 00 / July 2012
03 USER GUIDE
Page / 07
05