Saeco Aulika Sup 040R Service Manual page 32

AULIKA
m H/W
SECTOR TYPE
Work
FUNCTION
Home
FUNCTION
Stop
FUNCTION
Dreg+
FUNCTION
Dreg-
FUNCTION
dd
INFO
m Tray
INFO
mA
INFO
m H/W
INFO
m Door
INFO
m BU Dr
INFO
m Dreg
INFO
m BU
INFO
Work
Stop
dd m Tray
m Door
If activated, it operates the gearbox to bring the brew unit in the Work position
If activated, it operates the gearbox to bring the brew unit in the Home position
If activated, it stops the gearbox
If activated, it increases the set maximum value of grounds before the alarm is
triggered
If activated, it decreases the set maximum value of grounds before the
alarm is triggered
It shows the current setting of maximum grounds quantity.
If active, it shows that the magnetic reed sensor showing the presence of
the drip tray
Shows the maximum power value for the unit as average value per se-
cond.
If active, it shows that the Home/Work position microswitch is pressed.
If active, it shows that the side door microswitch is pressed.
If inactive, it shows that at least one between n Door, n Dreg and m BU is
inactive, or that the side door microswitch is not pressed and/or the unit
drawer is not present and/or the grounds drawer is not present (to test it
individually, it is necessary to insert both drawers)
If active, it shows that the magnetic reed sensor showing the presence of
the unit tray is active
that at least one between mDreg and m BU Dr is inactive or that the unit
drawer is not present and/or the grounds drawer is not present (to test it
individually, it is necessary to insert the grounds drawer: this deactivates
m Door too)
If active, it shows that the magnetic reed sensor showing the presence of
the grounds drawer is active
If inactive, it shows that m Dreg is inactive, or that the grounds drawer is
not present (this deactivates also m BU Dr and m Door).
If active, it shows that the unit presence microswitch is pressed.
2 Brew Unit
2 Brew Unit
Home
m BU Dr
m Dreg
DESCRIPTION
the unit drawer is present. If inactive, it means
the drawer is present.
Rev. 00 / July 2012
05 FAULT FINDING
Dreg+
Dreg-
mA: xxxx
m BU
Page / 08 03