Siemens simatic hmi op27 Equipment Manual page 99

Storing and Loading Data
Reserved memory A memory area, with the following default settings, is reserved for recipe data
area for recipe in the flash memory and on the memory card:
S
data
S
If the default values are not sufficient, they can be reset reset in ProTool.
Remember, however, that there is less space available for the configuration if
the reserved area is enlarged.
9-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
64 kB (flash memory)
128 kB (memory card).
Note
Remember that, in addition to the reserved area for recipe data records, 64 kB
are required on the internal flash memory and 128 kB on the memory card for
management data.
OP27, OP37 Equipment Manual
Release 05/99