Siemens simatic hmi op27 Equipment Manual page 89

Recipes
Loading data re- Proceed as follows to load data records from data media in the main memory
cords of the OP and download them to the PLC:
Deleting data The following section describes the sequence for deleting individual data
records records from the selected data medium. If all the data records on the data
medium are to be deleted, it is more practical to use the Format function
(see Page 8-8).
If the data record to be deleted from the data medium is active on the PLC, it
remains active on the PLC even after it has been deleted.
8-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Step
1 Position the cursor in the Data Record Processing standard screen on the
symbolic input window Recipe.
Select a recipe for the data record to be loaded from the selection window.
2 Select the name of the data record to be loaded (see Editing a data record,
Step 3, Page 8-10).
3 Position the cursor on the symbolic input field Data Medium.
Select the data medium from which the data record is to be loaded from
the selection window .
4
Press the function key assigned to the icon depicted on the
right.
The data record is copied first of all in the main memory of the OP and
then downloaded to the PLC where it overwrites the old data record.
Step
1 Position the cursor in the Data Record Processing standard screen on the
symbolic input field Recipe.
Select a recipe for the data record to be delete from the selection window.
2 Position the cursor on the symbolic input field Data Medium.
Select the data medium containing the data record to be deleted from the
selection window .
3 Select the name of the data record to be deleted (see Editing a data
record, Step 3, Page 8-10).
4 Press the function key assigned to the icon:
5 Confirm the subsequent confirmation request with "Yes" by entering 0 or
1 for "No" to cancel the action.
Action
Action
OP27, OP37 Equipment Manual
Release 05/99