Op37 In Dos Mode - Siemens simatic hmi op27 Equipment Manual

OP37 in DOS Mode

Use
The OP37 is also designed for use in DOS mode. It can be used for different
applications. The default settings apply to operation with a configuration
created in ProTool. The OP37 can be used for applications which run under
both DOS or Windows. These applications might be:
S
S
S
Conditions
In order that the OP37 can be used in DOS mode, a data medium, such as disk,
hard disk or PCMCIA hard disk must be available. Set one of these data media
as the boot medium in Setup. Also, connect a keyboard and possibly a mouse
as well. An MF2 keyboard can be connected to the front connector. A PS2 con-
nector is available at the rear of the OP37 for connecting a PS2 keyboard, and
there is another connector for connecting a PS2 mouse.
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
programming software
a standard application or
a customized application.
15
15-1