Clear/Initialize Storage Medium - Siemens simatic hmi op27 Equipment Manual

9.2

Clear/Initialize Storage Medium

Delete flash/
Before beginning making a backup copy of new recipe data or a modified con-
memory card
figuration, delete or initialize the target data medium. This establishes a
defined status for the data medium.
Make sure that the storage module is not inserted when the flash memory is to
be deleted because the OP accesses the storage module when switching to
Download mode.
Perform the following steps to clear or initialize memory:
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Note
All data on the data medium is lost as a result of deletion. All existing config-
urations are deleted on initialization, but the recipe data records are retained.
Step
1 Switch off the power supply to the OP. Press the
adjacent key combination to restart.
2 Insert the memory card to delete or initialize data
on it. The following messages appear in succession
on the OP:
Press 'DEL' to erase total Flash
Press 'DEL' to init Flash
Press 'DEL' to erase total Modules
Press 'DEL' to init Module
3 Scroll to the next message using the keys depicted
on the right.
4 Confirm the selected function with the keys depic-
ted on the right.
Storing and Loading Data
Action
+
ESC
or
ENTER
INS
DEL
+
ESC
9-3