Siemens simatic hmi op27 Equipment Manual page 86

Creating a new
data record
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Step
1 Position the cursor in the Data Record Processing standard screen on the
symbolic input field Recipe.
Select the recipe for the new data record in the selection window.
2 Position the cursor on the symbolic input field Data Medium.
Select from the selection window the data medium on which you want to
save the new data record.
3 Position the cursor on the alphanumeric input field Data Record Name.
Enter the name of a data record, which does not yet exist, in the input
window . The length is limited to 11 characters.
4 Press the function key assigned to the icon.
5 The system asks whether this data record is to be newly created. Enter
for "Yes".
6 Enter the respective values in the edit window (Figure 8-4).
Confirm each entry by pressing:
7 In order to save the data record, press the same key again:
Otherwise, discard the data record by pressing:
8 When the following system request appears Save Data Record?
Enter for "Yes". The data record is then saved on the data medium
0
selected.
Action
Recipes
0
ENTER
ENTER
ESC
8-9