Siemens simatic hmi op27 Equipment Manual page 194

Control Panel Interface
Inputs
No. of inputs
Optical isolation from intern. logic circuitry
Input voltage
S
rated value
S
with signal "0"
S
with signal "1"
Input current with signal "1"
Input delay
Connection of mechanical switches
Bounce time
Cable length of sensors, unshielded
Ambient conditions
Location
S
Max. permissible angle of inclination
without forced ventilation
max. permissible ambient temperature at
S
operation up to 10° angle of inclination
S
operation up to 35° angle of inclination
S
shipping, storage
Relative humidity
S
operation
S
shipping, storage
Shock loading
S
operation
S
shipping, storage
Vibration
S
operation
S
shipping, storage
Max. pressure difference (front/rear)
Barometric pressure
S
operation
S
shipping, storage
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OP27
24 V DC
0 to 5 V
15 to 30 V
Typic. 5 mA at 24 V
0.3 msec
Possible
v 10 msec
OP27
Vertical"35°
0 ... 50° C
0 to 40° C
–20 to 60° C
v 95%, no condensation
v 95%
15 g/11 msec
25 g/6 msec
0.075 mm (10 Hz to 58 Hz)
1 g (58 Hz to 500 Hz)
3.5 mm (5 Hz to 9 Hz)
1 g (9 Hz to 500 Hz)
706 to1030 hPa
581 to 1030 hPa
Technical Data
OP37
16
–
1 m
OP37
(FDD = floppy disk drive)
"35°
without FDD:
"25°
with FDD:
4 to 45° C
4 to 40° C
–20 to 60° C
5 g/11 msec for floppy disk or
hard disk access, otherwise
15 g/11 msec
25 g/6 msec
0.035 mm (10 Hz to 58 Hz)
1 g (58 Hz to 500 Hz)
0.5 g with floppy disk
drive/hard disk
3.5 mm (5 Hz to 9 Hz)
1 g (9 Hz to 500 Hz)
2 hPa
A-5