Siemens simatic hmi op27 Equipment Manual page 93

Recipes
Save (Create) A record set can be created in standard screen Data Record Processing in two
different ways, i.e. saved on a data medium:
1. Save a data record for each recipe
2. Save a data record individually for selected recipes
Load
During the loading procedure all the data records with the selected name
located on the data medium are loaded in the main memory of the OP and
transferred on to the PLC. The sequence of steps corresponds to the procedure
described on Page 8-12 under Loading data records.
8-16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Step
1 Select RecordSet as the recipe.
2 Define the data record name and the data medium.
3 Save the record set as with a data record.
A data record is created for each recipe.
4 Delete any data records not required.
Step
1 Select the recipe name, e.g. ORANGE.
2 Define the data record name (e.g. Drink) and data medium. Each data
record name must be created with the same name (= Drink).
3 Edit the data record and save it.
4 Repeat steps 1 and 3 for each data record.
Note
S
It may take a relatively long time to upload a record set from the data
medium to the PLC, depending on the size of the recipes. A record set
should, therefore, only contain essential recipes.
S
During the following downloading procedure, all current values of all
recipe tags are transferred, and not just the data records with the same
name:
– PLC ³ OP
– PLC ³ Data medium
– OP ³ PLC
Action
Action
OP27, OP37 Equipment Manual
Release 05/99